Air Duster
Moisture-Free Clean Air
Puts high-pressure precision dusting at your fingertips. Used extensively in photo, chemical, computer and electronic assembly, repair and manufacturing operations. Completely dry and abrasion free. Eliminates the possibility of blowing moisture into sensitive electronic parts. Pressurized with a nonflammable propellant to eliminate fire hazard.

Away De-Icer Spray
Quickly loosens ice and frost from windshields and windows. Thaws frozen locks. Non-corrosive.

BPK-200
A high performance degreaser for removing brake fluids and grease from small parts, bearings, etc. Leaves no residue, dries fast, and is safe on plastics. For general degreasing.

BPK-2K
This highly concentrated solvent blend provides maximum performance in a degreaser without the use of ozone depleters or chlorinated solvents. Powerful blasting spray easily removes brake fluid, grease, oily dirt and contaminants from linings, pads and drums, cylinders and springs without disassembling the unit. Also includes extension tubes for hard-to-reach areas. Will not foul waste oil. This excellent, all-around metal parts cleaner is specially formulated to meet or exceed the 1/1/97
V.O.C. requirements for California.

Coil Solve
Coil Cleaner
Coil Solve offers maximum cleaning and degreasing from an aerosol coil cleaner. The high solvency formula quickly and easily liquifies dirt, grease, oil or other residue and deposits while the blasting nozzle powerfully separates the undesirable materials from the surface. Coil Solve can be used on most types of coils and is super fast evaporating, requiring little or no wiping or post-use cleanup. The nonflammable, nonconductive formula is safe to use on or near live equipment while the pleasant lemon fragrance leaves a clean and fresh smell. Coil Solve contains no ozone depleters.

Dry Moly Lube
A quick-drying lubricating film with superior antifriction, anti-seizing properties suitable for high pressures and high temperatures. Excellent for dirty environments where oil or grease is not suitable. Leaves a solid, dry film of molybdenum disulfide. 110° to 1050°F. 100,000 PSI.

EZ-GO Gasket and Contact Cement Remover
A strong, fast, clinging solvent which removes gasket sealants, cements, adhesives, paint and varnish. Also good for removing vandalism from brick.

Fantastic II
A non-flammable, non-conductive solvent degreaser for cleaning dirt, grease and grime from electrical contacts, motor, engine parts, bearings, tools, etc. Contains no ozone depleting chemicals.

Fantastic II Scented
All the cleaning power of Fantastic II but with a
lemon fresh scent.

Food Grade White Grease
A high-purity, high-temperature, ultrapolymerstructured white food grade grease with outstanding load carrying ability and high temperature resistance. Protects against rust, oxidation and wear. Resists water and steam washout. USDA and FDA approved.

Gear Plate Open Gear Lubricant
A tacky, semi-viscous, sprayable liquid coating that lubricates and protects all moving metal surfaces from metal-to-metal friction. Forms an elastis retractable film that constantly and automatically replaces itself with every revolution or movement of the metal part. Fully effective under water and in hot or cold conditions.

Go Free
A penetrating oil with a unique concentrated formula containing micron-sized particles of molybdenum disulfide and tetraflouroethylene. Forceful jet spray penetrates through rust and corrosion to free and lubricate frozen parts. Contains no chlorinated solvents.

Grit On
Slip Resistant Epoxy Coating
A slip-resistant, epoxy coating that cures to a hard, flat, textured finish. Designed for interior and exterior use on concrete, steel, wood, fiberglass, aluminum and other surfaces where a slip-resistant finish is desired. Effective on steps, ramps, loading docks, ladders, running boards, showers, bathtubs, around machinery and anywhere water or slippery conditions exist. Available in black, clear, and safety yellow.

HI-P Contact Cleaner
High Purity Solvent
The ultimate purity solvent for critical cleaning of magnetic tape, computer, electronic, radio, telephone and transmission equipment. Ideal for cleaning contacts in assembly operations prior to to inspection. Solvent does not affect air conditioned atmospheres. Used extensively for cleaning hi-tech equipment. Will not harm plastic.

HI-P-PS
This aggressive aerosol precision cleaner provides high performance yet is economical in use. The advanced aerosol product is a high purity, nonresident, fast dry formula that is completely plastics safe and contains no ozone depleters or chlorinated solvents. For added user safety, it is nonconductive to over 41 KV per ASTM D-877 and will not cause “freeze out” or attract moisture when used as directed.

Insta Shine
A new generation aerosol dusting, cleaning and shining aid all achieved in one simple application. Quick breaking foam contains no silicones or wax thereby eliminating surface build-up. Just spray on, wipe clean and buff to remove dust and restore life and brilliance to almost any surface.

Kleer Kote
A spray-on, clear, flexible, plastic-like protective coating for all flat or curved surfaces, Kleer Kote may be used for protecting and waterproofing outdoor signs, electrical connections, inspection tags, tools, documents, boots, canvas, etc. Kleer Kote is extremely durable, stays put, absorbs vibrations and has a high di-electric strength.

Kuul Cutting and Tapping Fluid
A cooling and lubricating fluid for use with drills, taps and cutting tools. Suitable for practically all metals. Synthetic base.

Masterlube NC
A non-flammable, non-conductive, all-purpose mechanic’s spray. Makes any repair job easier. Loosens frozen and rusted parts of locks and hinges. Provides lubrication and corrosion protection. Displaces water in wet electrical systems. Protects tools and machinery. USDA approved.

No Grab Lubricant
Extreme high temperature, high pressure lubricant and sealant prevents galling, seizing and galvanic action. Suitable up to 2100°F.

PMR Mold Release—Paintable
A lecithin base, non-silicone, mold release that allows parts to be painted, laminated and bonded.

Protecto Flex
Provides a semi-hard, dirt-resistant, long-term corrosion preventive coating which will not crack with expansion, contraction or flexing. Gives prolonged protection for metal parts and machinery against atmospheric conditions. Will penetrate existing rust and stop it.

Red Spray Grease
All-purpose, heavy-duty penetrating grease suitable for temperatures from -40°F to 570°F. Has excellent adhering properties, water resistant and good for extreme pressures and high shock loads. Actually cleans out old grease and oil and then puts in new clean grease. USDA approved.

Royal Flush
Next-Generation Solvent Degreaser for Industrial and Electronic Maintenance
The advanced chemistry combines powerful degreasing action with the low individual/environmental impact. The nonchlorinated formula contains no known or suspected carcinogens, ozone depleters or materials subject to regulation under California Prop65, SARA 313, NESHAP, HAP, or RCRA. As a multi-purpose industrial cleaner, this fast-evaporating, nonflammable product can be used anywhere in industry to remove grease, oil, dirt, and other deposits from virtually any metal equipment. Royal Flush can also be used on live electrical equipment. The product features a special dual action valve system which enables both a misting spray for broad area degreasing and a blasting spray for hard to reach areas and extra deposit removal power.

Refresh
H.A.V.C. Treatment
This unique product is specially formulated to handle the problems associated with moisture and deposit accumulation in heater and air conditioning systems. The quat fortified formula’s powerful fresh fragrance and chemical odor counteractant system does not just cover up malodors but effectively eliminates them at the source. It helps refreshen systems subjected to damp, musty type aromas, cigarette smoke, food odors, pets, and other undesirable aromas. The forceful spray and easy-to-use actuator and extension tube assembly allow for access to recessed chambers without disassembly. Formulated with the environment in mind, this product has no CFC’s or other ozone depleters.

SS 316
Stainless Steel Coating
A super-tough coating containing a stainless steel flake suspended in a polyurethane binder. Protects metal, wood and ceramics from corrosion and deterioration caused by harsh chemicals, severe weather or abrasion. Will withstand temperatures to 1200°F.

Silicone Lube
High-viscosity, food-grade lubricant and release agent. Prevent adhesion of dirt, chemicals and glue. USDA approved.

Silicone Spray
A heat-stable mold release which is non- flammable, colorless and odorless. An extremely high viscosity silicone that resists breakdown under mechanical shear or heavy load. Formulated for acrylics, polystyrenes, cellulose, polyester, rubber, melamines, etc.

Safety Lube
Food Processing Equipment Lubricant
Odorless and tasteless, yet it adds up to 80% more life to blades on choppers, dicers, slicers and food processing equipment. May also be used as a release agent on gaskets or seals of tank closures, and as an airline lubricant. USDA and FDA approved for food contact.

Skin Shield
A protective hand cream to prevent irritation from oils, solvents and paints. A barrier that lets skin breathe and makes hand easier to clean.

Slick
A penetrating, teflon-enriched lube, Slick is clean and long-lasting. It will withstand temperatures from -30°F to 600°F, prevent sticking and freezing of rubber to metal, prevent rust and corrosion, and resists water washout.

Static Kil
Prevents static and reduces dust attraction on all machinery parts, especially packaging machinery. Effective on synthetic and paper materials.

Stick-Up
A versatile and convenient means of bonding paper, cloth, wood, metal, gaskets, hose connections and fittings. Wide spectrum chemical resistance. High copper base. Eliminates hot spots.

Top Gun
An industrial-strength foam cleaner and degreaser, Top Gun enables simple and easy cleanup of tools, parts, workbenches, vent covers, machinery, industrial equipment, coils, concrete, and more. Sprays as an eluding, heavy-duty foam that clings to surfaces and provides extended cleaning contact time. Contains super powerful, watersoluble, grease dissolving agents for instant “mega forceful” cleaning action. Provides a self-indicating foam, which quickly breaks down grease and grime and becomes dirty indicating soil is ready to be flushed away. Deodorizes as it cleans, leaving the area with a fresh citrus scent.

Sure Grip Belt Dressing
Special ingredients prevent slip on V-belts, flat and round belts, rubber, leather or fabric. Increases power without gumming. Will not glaze or collect dust. Works well in wet,outdoor conditions. USDA approved.

White Grease
A multi-purpose, all-weather, long-lasting, waterresistant, white grease ideal for automotive and industrial applications.


BVK-94
Non-Selective, Rapid, Aerosol Weed Killer
This product provides rapid knockdown and kill of most weeds and unwanted vegetation. Use around fence rows, parking lots, buildings, loading ramps, storage yards, tank farms, industrial plant sites and similar areas. Use to kill weed which interfere with drainage, create a fire hazard or cause unsightly appearance. Contains a soil sterilant, which will control weeds up to one year. Can sprays upside down only. Battery Terminal Cleaner Cleans corrosion build-up around terminals, eliminates corrosion residues and provides a protective film. Uses color performance indicator—turns red in presence of acid, turns yellow when acid is neutralized.

Bea Coil
Coil Cleaner
A powerful, thick, clinging foam which removes dirt, lint and grease from air conditioner and heater coil fins. Portable aerosol features a strong directional spray which helps force foam into coil air spaces. Water-based foam creates no harsh vapors and leaves a fresh scent. Bioenzymatic action attacks mold and fungus stains. Spray in pan and drain lines to keep them clear and destroy odors.

Bea Jel
Jelled Deodorant
This unique jelled deodorant is designed to be used anywhere offensive odors are a problem. The clinging gel allows product to be applied on horizontal, vertical, and irregularly shaped surfaces. Its slow-releasing formulation continuously provides fragrance for extended periods of time until the gel evaporates completely. Reapply as necessary. Ideal for use on hard, non-porous surfaces. Spray on air conditioner filters, above doors, in trash receptacles and dumpsters, on walls, in port-a-toilets, above ceiling fans, and behind toilets.

Bea Slik
Heat Stable Silicone Release Agent
Bea Slik stops sticking and binding, protects equipment and increases production. It is colorless, odorless, non-staining, waxless and heat stable. Withstands temperatures from -40°F to 392°F. USDA and FDA approved for food contact.

Bea Tef
An all-purpose dry lubricant and release agent. Chemically inert powder for low friction and excellent release characteristics. Uses Vydax powder, a DuPont product.

Bolt Buster
Special penetrants “creep” deep into rusted or corroded parts to allow fast and easy release. Lubricates and displaces moisture, and is non- flammable. USDA approved.

Chain and Cable Lube
Penetrates and lubricates internal parts of conveyor chains as well as cable. Imparts molybdenum disulfide residue and also forms a rust preventive coating.

Choke and Carburetor Cleaner
Frees and cleans carburetor parts including valves, linkages, thermostatic coils, accelerator parts. Cools automatic chokes for adjustment.





Home | Site Map | Products | About Us | S-722 | Careers | Contact Us
©2004 Beaver Research Company